Steep-slope standing seam for gas stations, automotive dealerships, churches and industrial buildings. A 50+ year system, Class 4 impact rated, with minimal maintenance.
Steep-slope metal for buildings with a long horizon. Roof Experts installs standing seam metal on gas stations, automotive dealerships, churches and industrial buildings across DFW and our Texas, Colorado, Missouri and Oklahoma markets — a 50+ year system, Class 4 impact rated, fire resistant, and about as low-maintenance as commercial roofing gets.
The trade
Metal costs more to install than a membrane system and less to own. On a 100,000 square foot building the range across systems runs from roughly $450K for a TPO recover to $1.2M for standing seam metal — a real difference, and one that only makes sense if you are holding the building long enough to collect on it.
Commercial standing seam typically runs 30 or more years before it reaches the end of its useful life, and the system as a whole is a 50+ year roof. Against a membrane replaced every 20 to 25 years, that arithmetic works — but only with the ownership horizon to match.
Where it fits
This is the part worth settling early: standing seam is a steep-slope system. If your building is low-slope, metal is not the answer and a membrane is — see TPO roofing for the system that dominates DFW commercial. We will tell you which category your building falls into at the inspection rather than quoting you the wrong thing.
Metal expands and contracts with temperature swings, and that movement is what works fasteners loose over time. On a large commercial elevation that is not a theoretical concern — it is the single most common reason a metal roof underperforms its rated life.
It is why we install over a proper substrate and why we would rather talk through the detailing at the inspection than hand you a number over the phone.
Also available
We repair metal roofs we did not install — panel and fastener replacement, seam and flashing repair, and correcting work another contractor got wrong. For homes, see residential metal roofing, or the metal roofing hub for the full comparison.
High-visibility structures where appearance and low maintenance both matter.
Large steep-slope elevations where the roof is part of the brand.
Long-span steep slope, often with a fifty-year ownership horizon to match.
Where minimal maintenance and puncture resistance outweigh upfront cost.
Energy efficient finishes that reduce cooling load on large footprints.
The highest impact rating, and fire resistance to go with it.
Certified inspector on-site, photo-documented findings, written report, no pressure and no hidden costs.
Small repair, big repair, or full replacement — we tell you which one this roof needs and why.
Instant online quote with sign-on-screen. The price you are quoted is the price you pay — no surprises.
Crew arrives on schedule, works clean, leaves no debris. Workmanship warranty on every job.
Full tear-off & replacement of a single-family roof.
TPO, EPDM, modified-bitumen, metal commercial systems.
Targeted repairs of any kind, residential or commercial.
Don't see your question? Call us at (469) 936-7663 — we're happy to talk it through.
No — standing seam is a steep-slope system. If your building is low-slope, a membrane system like TPO is the right answer. We will tell you which category your building falls into at the inspection.
Higher upfront. On a 100,000 square foot building, the range across systems runs from roughly $450K for a TPO recover to $1.2M for standing seam metal. Metal earns that back over a service life measured in decades rather than years.
Very little — no coating cycles, no seam inspections of the kind a membrane needs. What it does need is periodic checking of fasteners and flashings, because metal moves with temperature and that movement is what eventually loosens things.
It can. The damage is generally cosmetic rather than functional, which matters more on a customer-facing building than an industrial one. Class 4 is the highest impact rating available and standing seam carries it.
Yes — panel and fastener replacement, seam and flashing repair, and correcting installations another contractor got wrong. That last category is a fair share of our metal work.
Free inspection, honest scope, real warranty. Most service work scheduled within 24–48 hours.
(469) 936-7663