Fort Worth requires no permit for a shingle-only re-roof. That means no inspector is coming — nobody independent will ever look at your underlayment, your valleys, your fasteners or your flashing.
Roof Experts is the residential roofing partner Fort Worth TX property owners trust. We bring DFW-quality crews and materials to every Fort Worth project — asphalt shingles, metal, tile, and slate. Free inspections, transparent pricing, workmanship warranties. Need an estimate? Call Roof Experts at (469) 936-7663 or request your free roof inspection online.
Deck condition, underlayment and dry-in, valley and flashing detail, finished field — photographed and handed to you. On a Fort Worth shingle re-roof there is no city inspection, so this file is the only independent evidence of what you actually got.
Specified to Fort Worth's adopted 105 mph, with the fastener schedule, starter course and edge detailing that number implies — not to a regional average borrowed from a neighbouring city at 115.
Fort Worth's own guidance confirms 3/8-inch plywood or OSB remains compliant at 24 inches on centre with a 24/0 span rating. In the 1950s and 60s south-side neighbourhoods, blanket 'code requires a full re-deck' claims are a sales tactic. We replace the bad sheets and show you why.
Fairmount, Mistletoe Heights, Carver Heights, Morningside, Garden of Eden and Stop Six Sunrise Edition are city-designated historic districts with published, mandatory standards. We build to them and carry the Certificate of Appropriateness submittal.
UL 2218 Class 4 in the most hail-prone county in Texas. Many Texas carriers discount for Class 4, and with 91 hail days a decade the case here is as strong as anywhere in the state.
Within 300 feet of a home, weekend work may not start before 9:00 a.m. A crew arriving at seven on a Saturday is generating a neighbour complaint, not progress.
With no permit and no inspection on a shingle-only job, the only assessment your roof will ever get is the one your contractor performs. We do it properly — decking, ventilation, flashing and the low-slope sections — before a number exists.
How much decking is included, what happens if we find more, what flashing is being replaced rather than reused, and what ventilation is specified. This matters more here than anywhere, because there is no inspector to catch what was left out.
Fairmount's published standards are mandatory and specific — R-panel and rib panel prohibited on houses, standing seam only on secondary slopes under 4/12, vinyl gutters prohibited, rafter tails not to be boxed in, skylights flat and under eight inches. We prepare the CoA submittal rather than handing you a form.
Deck, dry-in, valleys, flashing, fastening and finished field. In a city with no inspection on this work, that photo file is your warranty documentation, your resale documentation and your claim documentation all at once.
Dimensional, UL Class A, specified to Fort Worth's adopted 105 mph. The standard across the far-north growth ring and the post-war south side alike.
A reinforced mat tested to UL 2218 Class 4, in the county with more hail days than any other in Texas — 91 in eleven years. Frequently eligible for a carrier premium discount worth pricing first.
In Fairmount, original tile and slate roofs shall be maintained, composition shingle is allowed as an in-kind replacement, and metal shingles are permitted only where they accurately replicate the original in appearance, scale and texture.
Written, on our installation. In a city that does not inspect this work at all, the continuity of the company behind the warranty is the entire safeguard — ours has run from the same building since 2019.
On qualifying architectural and impact-rated shingles, subject to installation to the published specification — including the ventilation requirements most denied claims turn on.
We come back and check sealant, flashing, boots and ridge before the next April peak — because nobody else is going to.
Don't see your question? Call us at (469) 936-7663 — we're happy to talk it through.
Not for a shingle-only re-roof. Fort Worth's permit requirement is triggered the moment decking is replaced. So a straightforward tear-off and re-cover with no deck work needs no building permit — and gets no city inspection. If any decking is replaced, a permit is required and an inspection follows.
You don't, unless your contractor gives you evidence. That is the practical consequence of Fort Worth's rule, and it is why we document every roof in stages — deck condition, underlayment and dry-in, valley and flashing detail, and finished field — and hand the file over at closeout. It is worth asking any bidder directly what they will show you, because there will be no inspection card to point at.
Usually not. Fort Worth's own published guidance states that 3/8-inch plywood or OSB remains compliant at 24 inches on centre where it carries a 24/0 span rating, and older Fort Worth decks frequently meet that. Genuinely rotten, delaminated or cracked sheathing obviously has to go, and we will show you each sheet we are calling bad. But 'code requires a full re-deck' as a blanket statement here is a sales line, and an expensive one.
105 mph, from the 2021 amendment package adopted as Ordinance 25383-03-2022 and effective 1 April 2022. That is lower than several neighbouring cities, which still carry 115 mph — so the fastener and edge-detail requirements are not identical across a city line.
Fairmount's published standards are mandatory and specific. Original tile and slate must be maintained. Composition shingle is permitted as an in-kind replacement. Metal shingles are allowed only where they accurately replicate the original material in appearance, scale and texture. R-panel and rib panel metal are prohibited on residential structures. Standing seam is permitted only on secondary roof slopes under 4/12. Vinyl and plastic gutters are prohibited, the original gutter profile must be maintained, and exposed rafter tails may not be boxed in, concealed or removed.
In Fairmount a new skylight should rise no more than eight inches and should be flat — bubble and round skylights are identified as inappropriate. Any skylight change is part of what the Certificate of Appropriateness reviews, so it needs settling before the roof is designed rather than discovered during tear-off.
Very possibly. Fort Worth has 75,826 homes built between 2000 and 2009, which puts that entire cohort at sixteen to twenty-six years — right at the end of a builder-grade shingle's honest life, before you even count eleven years of the heaviest hail record in Texas on top of it.
Yes, but not early. Within 300 feet of a home, weekend work may not begin before 9:00 a.m. in Fort Worth. We schedule around it rather than risking a stop-work complaint on your street, and we tell neighbours what to expect.
Free inspection, honest scope, real warranty. Most service work scheduled within 24–48 hours.
(469) 936-7663