★★★★★ 87 5-Star Reviews
Home/ Services/ Roof Replacement Fort Worth TX
Roof Replacement in Fort Worth, Texas

Roof Replacement Fort Worth TX

Replacing decking is what triggers a permit in Fort Worth. So a contractor who tells you the whole deck must come off is also telling you they now need a permit — and one who quietly leaves bad sheathing avoids one.

✓ Workmanship warranty ✓ 87 five-star Google reviews ✓ Most repairs in 24–48 hrs
Full tear-off, decking and a documented system

Roof replacement for Fort Worth homes

24/0
span rating at which 3/8" plywood or OSB remains compliant at 24" o.c.
105 mph
Fort Worth's adopted design wind speed — lower than several Tarrant neighbours
"There is a real incentive problem built into Fort Worth's rule. Replacing decking means pulling a permit and taking an inspection. Leaving it means neither. Ask your contractor which way that incentive is pointing on your roof."Roof Experts — 601 N 1st St, Garland TX
What we cover

If your roof can fail, we can fix it.

Roof Experts is the roof replacement partner Fort Worth TX property owners trust. We bring DFW-quality crews and materials to every Fort Worth project — asphalt shingles, metal, tile, and slate. Free inspections, transparent pricing, workmanship warranties. Need an estimate? Call Roof Experts at (469) 936-7663 or request your free roof inspection online.

check

Full tear-off and an honest deck assessment

Everything off, so the sheathing is seen. Fort Worth's own guidance confirms 3/8-inch plywood or OSB remains compliant at 24 inches on centre with a 24/0 span rating — so we replace what is genuinely bad and keep what is sound, and show you the photographs for both.

code

Permit pulled where decking is replaced

That is the trigger in Fort Worth. If decking comes out, a permit is required and an inspection follows. We pull it rather than quietly leaving bad sheathing to avoid the paperwork — which is the shortcut the rule accidentally rewards.

drop

Ventilation brought to specification

Intake and exhaust balanced to the attic volume. The requirement most denied shingle warranty claims actually turn on, and one nobody will check for you on a shingle-only job here.

shield

Underlayment, starter and edge detailing to 105 mph

Synthetic underlayment, a proper starter course, and ridge and rake detailing built to Fort Worth's adopted figure rather than to a regional average borrowed from a 115 mph neighbour.

landmark

Historic district submittals

Fairmount's standards are mandatory and specific, and Mistletoe Heights, Carver Heights, Morningside, Garden of Eden and Stop Six Sunrise Edition are also designated. We prepare and carry the Certificate of Appropriateness.

file

Photographic record at every stage

Deck, dry-in, valleys, flashing, fastening and finished field. On the large share of Fort Worth replacements that get no inspection, this file is your only durable evidence.

Our process

Four steps from first call to finished.

01

Deck walk and a written scope with the assumptions in it

How many squares, how much decking is included, what happens if we find more, what flashing is replaced rather than reused, and what ventilation is specified. In a city with no inspector on most of this work, the written scope is doing the inspector's job.

02

Historic district status settled before a start date

Six city-designated districts carry published, mandatory standards, and a Certificate of Appropriateness is required before work. In Fairmount that reaches material, metal profile, gutters, rafter tails and skylights. We settle it first.

03

Tear-off, deck, dry-in — same day where weather allows

Nothing opened wider than we can dry in the same day. Deck repairs photographed before they vanish under underlayment, and the whole property protected and magnet-swept each evening. Weekend starts no earlier than 9:00 a.m. within 300 feet of a home.

04

Warranty registered, file handed over

Manufacturer warranty registered including the ventilation compliance most denied claims turn on, and the photographic record delivered at closeout — the document you will show a buyer, an inspector or an insurer in six years.

Roof types we work on

Asphalt, metal, tile, slate, shake — we know it all.

Architectural laminated shingle
Standard

Architectural laminated shingle

Dimensional, UL Class A, specified to Fort Worth's adopted 105 mph. The default across the far-north growth ring and the post-war south side alike.

UL Class A fire ratingSpecified to Fort Worth's adopted 105 mphFull manufacturer system warranty available
Class 4 impact-resistant shingle
Hail capital

Class 4 impact-resistant shingle

UL 2218 Class 4 in the county with more hail days than any other in Texas — 91 in eleven years, with 5.00-inch hail at Mansfield in June 2023. Frequently eligible for a Texas carrier discount.

UL 2218 Class 4 impact ratingOften eligible for a carrier discountStrongest case anywhere in Texas
In-kind tile, slate and compliant metal
Historic districts

In-kind tile, slate and compliant metal

Fairmount requires original tile and slate to be maintained, permits composition shingle as in-kind replacement, prohibits R-panel and rib panel on houses, and allows standing seam only on secondary slopes under 4/12.

Original tile and slate must be maintainedR-panel and rib panel prohibited on housesVinyl and plastic gutters prohibited

Workmanship warranty, in plain English.

5yr

Workmanship warranty

Written, on the installation. In a city that does not inspect most residential re-roofs, the continuity of the company behind the warranty is the entire safeguard — ours has run from the same building since 2019.

30+yr

Manufacturer system warranty

On qualifying systems installed to the published specification, including the ventilation requirement most denied warranty claims hinge on.

1yr

First-season inspection

We return and check sealant, flashing, boots and ridge before the next April peak — because no city inspector will.

Other services

While we're up there — we can also handle these.

Roof Replacement Fort Worth TX FAQ

Common questions about this service.

Don't see your question? Call us at (469) 936-7663 — we're happy to talk it through.

When does a Fort Worth replacement need a permit? +

The moment decking is replaced. A tear-off and re-cover with shingles only requires no building permit and gets no inspection. If any decking comes out, a permit is required and an inspection follows. That is a genuinely unusual rule and it is worth understanding, because it creates an incentive to leave bad sheathing in place.

So should I be suspicious of a contractor who says my deck is fine? +

Not automatically — most Fort Worth decks genuinely are fine, and the city's own guidance confirms 3/8-inch plywood or OSB remains compliant at 24 inches on centre with a 24/0 span rating. But you should expect photographs either way. A contractor who says the deck is sound and shows you pictures of it is doing the job. One who says it without opening anything is guessing, and one who insists the whole deck must go without showing you rot is selling.

What wind speed will my roof be built to? +

105 mph, from Fort Worth's 2021 amendment package adopted as Ordinance 25383-03-2022 and effective 1 April 2022. That is lower than several Tarrant County neighbours, which still carry 115 mph — so detailing built for one is not correct for the other.

How long does a replacement take? +

Most Fort Worth single-family replacements are one to two days for tear-off, deck and install, with the roof dried in the same day it is opened. Weekend work cannot begin before 9:00 a.m. within 300 feet of a home, so a weekend day is shorter than a weekday here.

I live in Fairmount. What are my options? +

Fairmount's published standards are mandatory. Original tile and slate must be maintained. Composition shingle is permitted as an in-kind replacement. Metal shingles are allowed only where they accurately replicate the original in appearance, scale and texture. R-panel and rib panel metal are prohibited on residential structures, and standing seam is permitted only on secondary slopes under 4/12. Vinyl and plastic gutters are prohibited, the original gutter profile must be maintained, and exposed rafter tails may not be boxed in or removed.

Which Fort Worth districts require historic approval? +

The city-designated districts include Fairmount, Mistletoe Heights, Carver Heights, Morningside, Garden of Eden and Stop Six Sunrise Edition, and a Certificate of Appropriateness is required before work begins. Elizabeth Boulevard, in the Ryan Place area, is also designated — worth confirming your exact boundary, because being one street off changes the answer.

Are impact-resistant shingles worth it here? +

The case in Fort Worth is about as strong as anywhere in Texas. Tarrant County logged 91 distinct hail days from 2015 to 2025 — the most of any county in the state and twelfth in the nation — and 12 June 2023 produced 5.00-inch hail at Mansfield. Many Texas carriers discount for a UL 2218 Class 4 product; get the actual number from your carrier and we will show you the price difference.

Will you handle the insurance claim? +

We document the damage, meet the adjuster on the roof and supply the scope. What we will not do is promise an approval or inflate a scope so your deductible disappears. On a mid-2000s Fort Worth roof the honest answer is sometimes ordinary end-of-life replacement rather than a claim, and we will say so.

Need this service? We can be there.

Free inspection, honest scope, real warranty. Most service work scheduled within 24–48 hours.

(469) 936-7663
������