Irving is the cleanest roofing code in North Texas — the 2024 IRC as published, with no local roofing amendments at all. It is also the strictest on when a permit kicks in: anything over one square.
Irving adopted the 2024 International Residential Code and wrote zero local roofing amendments. Chapter 9 of the IRC and Chapter 15 of the IBC apply exactly as published. Because the 2024 regional amendment package dropped the old R902.1 "Class A, B or C" requirement and Irving did not replace it, Irving has no local minimum roof-covering fire classification — unlike cities still on the 2021 cycle, which carry that requirement. Irving's adopted design criteria are 105 mph at Exposure C, stated verbatim in the city's own document. Irving is one of the few cities in the region that publishes the exposure category at all.
One correction worth making up front, because competitor pages get it wrong constantly: Irving is entirely in Dallas County. It is not split with Tarrant. If you are checking a storm date against a county record for an Irving claim, it is the Dallas County record.
Irving's permit trigger is the strictest nearby. A roofing permit is required for any project covering more than one square — 100 square feet. Richardson's threshold is 25% of the total roof area; McKinney requires one on everything; Fort Worth requires none at all on shingle-only work. Irving sits at 100 square feet, which means a patch that needs no permit in Richardson needs one here. The fee is $100 for single-family, $150 for multi-family and commercial, with $75 re-inspection.
Start without the permit and Irving adds an investigation fee of 100% of the regular fee — so a $100 single-family re-roof becomes $200. There is no $2,000 threshold in Irving's fee schedule; that is a different city's rule and it does not apply here.
Irving's housing splits into two very different markets, and the split matters. 35.9% of the stock predates 1980 — but only 38.1% of it is owner-occupied. Plymouth Park, Plymouth Park North, Freeway Park, Northgate and Northgate West together are roughly 3,200 lots of 1953-to-1966 housing, much of it now rental. Ridgecrest was platted in 1931 and is the oldest large single-family tract in the city; those roofs have been replaced many times over. On the other side, Las Colinas and Valley Ranch carry high-value custom roofs from the 1980s and 90s — Cottonwood Valley, Hackberry Creek Village and Hackberry Creek Estates among them — where tile, slate and standing seam are ordinary rather than exceptional.
That mix is why Irving is a market for a contractor who does both residential and commercial properly. There is a very large rental and multi-family inventory here, a large low-slope commercial base around Las Colinas and the airport corridor, and a genuinely old owner-occupied core, all inside the same city limits.
Repairs, replacements, installations, and inspections for homeowners. Class 4 impact-resistant shingles, metal, tile, slate.
View Residential Roofing →TPO, EPDM, modified bitumen, and metal systems for businesses and property managers. Maintenance plans available.
View Commercial Roofing →Emergency and scheduled repairs. Hail damage, leaks, flashing, and storm response with 1-year workmanship warranty.
View Roof Repair →Full tear-off and replacement with manufacturer warranties up to 50 years. Flexible financing available.
View Roof Replacement →Honest, no-pressure assessments for storm damage, pre-sale, and annual maintenance - written report included.
View Free Roof Inspection →Residential maintenance plans from $24.99/month. Annual inspection, priority scheduling, 10% repair discount.
View Roof Maintenance →Irving adopted the 2024 IRC as published and wrote nothing over the top of it, and because the 2024 regional package dropped the old Class A/B/C requirement, Irving has no local minimum fire classification. That is a real difference from cities still on the 2021 cycle, and it changes what a contractor may legally install here. Irving's own criteria are 105 mph at Exposure C — a published exposure category, which is rare in this region.
Irving requires a permit on any roofing project over 100 square feet — stricter than Richardson's 25%-of-area rule and far stricter than Fort Worth, which requires none on shingle-only work. Start without it and the city adds an investigation fee equal to 100% of the regular fee, turning a $100 single-family permit into $200. We pull the permit before the first shingle moves, every time.
Plymouth Park, Northgate and Freeway Park are roughly 3,200 lots of 1950s and 60s housing, much of it rental. Las Colinas and Valley Ranch carry custom tile, slate and standing seam. The airport corridor is low-slope commercial. Our team carries over 100 years of combined commercial roofing experience and we run residential daily, which is what Irving actually needs from one contractor.
Don't see your question? Call us at (469) 936-7663 — we're happy to talk it through.
Dallas County, entirely. Irving is not split between counties, despite how often that is reported. If you are matching a storm date to a county record for an Irving insurance claim, it is the Dallas County NOAA record that applies.
Any roofing project covering more than one square — 100 square feet — requires a permit. That is the strictest threshold among Irving's neighbours: Richardson's is 25% of the roof area and Fort Worth requires no permit at all for shingle-only work. The fee is $100 for single-family and $150 for multi-family or commercial.
Irving adds an investigation fee of 100% of the regular fee. A $100 single-family re-roof permit becomes $200. Note also that there is no $2,000 job-value threshold in Irving's fee schedule — that is a different city's rule and does not apply here.
105 mph, Exposure C, stated verbatim in Irving's adopted criteria. Irving is one of the few cities in the region that publishes the exposure category rather than leaving that cell blank, which is genuinely useful when a roof has to be engineered rather than just installed.
Not as a local requirement. Irving adopted the 2024 IRC with no roofing amendments, and the 2024 regional package dropped the blanket Class A/B/C sentence that 2021-cycle cities carry. So there is no local minimum fire classification in Irving. In practice essentially every architectural asphalt shingle on this market is UL Class A and that is what we specify, but the legal position here is different from Richardson's or Rowlett's.
Only the economics. Plymouth Park, Plymouth Park North, Freeway Park and the Northgate additions are roughly 3,200 lots of 1953-to-1966 housing and Irving overall is only 38.1% owner-occupied, so a great deal of this stock is investor-held. We are used to scoping these for owners who need a defensible cost, a real service life and documentation for the file, rather than a showroom presentation.
Yes. Cottonwood Valley, Hackberry Creek Village and Hackberry Creek Estates carry genuine tile, slate and standing seam, and replacing those in kind — or matching a discontinued profile — is a different trade from running composition shingle. It is also where a cheap bid does the most damage, because the mistakes are permanent and visible.
Ridgecrest was platted in 1931 and is the oldest large single-family tract in the city. Roofs there have been replaced many times over, which typically means multiple generations of fastener damage in the decking and flashing details that have been patched rather than renewed. We expect to find that and price it openly.
It is our depth. The Las Colinas and DFW Airport corridors hold one of the largest low-slope commercial inventories in the metro, and our people carry over 100 years of combined commercial roofing experience — TPO, modified bitumen, built-up, coatings and standing seam. With no local roofing amendments, Irving commercial work is scoped against the 2024 IBC Chapter 15 as published.
We run Irving out of our Garland shop at 601 N 1st Street. It is a straight shot across the metro and a routine route for our crews, with same-day emergency tarping after a storm.
Call us at (469) 936-7663, or request your free estimate online — most inspections are scheduled within 24–48 hours.
(469) 936-7663